|
The tiles are 12 inches square to give a size concept.
|
|
The shape of the nose is good, but the fit of the clear component (dry fit here), will need some work.
|
|
The flaps have been cut out and will be modeled in the takeoff position.
|
|
The wing engines are shaped well. Here they are dry fitted. I would prefer the seams to be top/bottom instead, but they will be easily filled.
|
|
The pitch angle of the #2 engine is a bit off (aft end should be lower a tiny bit), but still looks the part of a -10 or -30 nacelle.
|
1024x768 236KB, 192 hits.
(0)